Torque tables: Nord-Lock washers
The below torque values have been verified in test laboratories and represent a configuration example. The values are indicative and should not be seen as recommendations as varying conditions, joint designs and requirements apply.
|Cu/C paste*||Copper/graphite paste (Molykote® 1000)|
|Oil||WD40 has been used.|
|GF||Ratio of yield point. When tightening according to guidelines and with no deviation,
this is the pre-stress achieved expressed as % of yield point.
|μth||Thread friction coefficient|
|μh||Under head friction coefficient|
|1 N||0,225 lb|
|1 Nm||0,738 ft-lb|
Want to have the torque guidelines on the go? Download the Torquelator by Nord-Lock