Should I change my tightening torque with Nord-Lock?
Does the use of Nord-Lock washers affect my tightening routines? How?
When a tightening torque is applied to create a clamp load in a joint, friction under the bolt head (or nut) and in the threads must be overcome before any torque goes to achieving the clamp load.
Since the Nord-Lock washers feature serrations, the coefficient of friction under the bolt head (or nut) will be slightly increased. The thread friction remains unchanged. A slightly higher tightening torque is therefore required to achieve the same clamp load as for a flat faced joint.
Nord-Lock’s general tightening guidelines are taking the increased friction into account and permit to achieve a very accura te tightening.
Some users choose to keep their torque values when implementing Nord-Lock washers. It will result in a somewhat lower (-10% to -20%) but still acceptable preload.
It is also important to remember that friction varies significantly depending on bolt grade, bolt size, lubricant and joint material so real torque values may actually differ from torque guidelines.
Do you have a question about bolt securing?
Put the Nord-Lock experts to the test.
Email your questions about bolt securing to
Share this article
Like this article and want more?
Get engineering and bolting insights delivered straight to your inbox. Subscribe to our insights newsletter now!
Subscribe to our free magazine
Stay up-to-date with the latest news, insights and knowledge in the bolting industry by subscribing to Bolted magazine!