How to make a successful assembly for tapped holes
Here you can find our installation instructions for Nord-Lock wedge-locking washers when used with a tapped hole assembly. To install Nord-Lock wedge-locking washers, follow these 4 simple steps:
- Step 1: Discard any damaged bolt.
- Step 2: Lubricate.
- Step 3: Place the washer on the bolt and put it in the hole.
- Step 4: Tighten the joint according to the Nord-Lock torque guidelines.
For more detailed installation instructions, watch the video below.
Download PDF page with print function
Read Nord-Lock Torque Guidelines here -->
Read this article what the Experts says about about Torque -->
