How to make a successful assembly for through-holes

Here you can find our installation instructions for Nord-Lock wedge-locking washers when used with a through-hole assembly. To install Nord-Lock wedge-locking washers, follow these 4 simple steps: 

• Step 1: Discard damaged bolt. 
• Step 2: Lubricate. 
• Step 3: Place the first pair of washers on the bolt and place the second pair of washers on the nut. Mount the bolt in the hole by hand until positioning is complete. 
• Step 4: Tighten the lower joint 20 degrees and the upper joint according to the Nord-Lock torque guidelines. 

For more detailed installation instructions, watch the video below.  

Download PDF page with print function

Read Nord-Lock Torque Guidelines here -->

Read this article what the Experts says about about Torque -->

Watch this video to learn more about Torque --->