The Experts: Why do bolts rotate loose?

Q: Why do bolts and nuts rotate loose when a bolted joint is subjected to vibration and/or dynamic loads?

A: Loosening of threaded fasteners due to vibration and/or dynamic loads is an important phenomenon since it is one of the most common causes for failure of bolted joints.

A tightened bolt is elastically elongated but strives to assume its original length, much like a spring. This can only be accomplished by rotation of the bolt/nut in the loosening direction so that the bolt preload is lost. However the bolt/nut is prevented from rotating by friction between the contact surfaces in the threads and under the bolt head/nut.

If a joint is subjected to vibrations and/or dynamic loads that cause relative movement between the contact surfaces the friction is reduced because dynamic friction is lower than static. Therefore the bolt/nut is then no longer captivated by friction and rotates loose. The most common causes of movement between contact surfaces are vibration and external dynamic forces.

Do you have a question about bolt securing?
Put the Nord-Lock experts to the test.
Email your questions about bolt securing to

Ta kontakt med oss

Les mer om hvordan vi behandler din kontaktinformasjon i vår personvernerklæring.

Takk for at du kontakter oss!