Originální podložky Nord-Lock
Originální podložky Nord-Lock
Nord-Lock Steel Washers |
||||
Applications | General steel applications | |||
Material standard | EN 1.7182 | |||
Size range | M3-M130 #5 to 5" |
|||
Corrosion resistance | Minimum 1,000 hours in salt spray test (according to ISO 9227) | |||
Hardening | Through hardened | |||
Washer hardness* | ≥ 465HV1 | |||
Coating | Delta Protekt® KL100 zinc flake coating | |||
Bolt grades | Up to 12.9 | |||
Temperature range*** | -50°C to 200°C | |||
Product designation | NL NLsp |
|||
Laser marking type code | flZn |
* Washer hardness must be greater than the hardness of the mating surfaces in order to assure its mechanical function.
*** Temperature recommendations are based on information from the raw material supplier and testing. The locking function is not affected within the specified range.
Nord-Lock Stainless Steel Washers |
||||
Applications | General stainless steel applications | |||
Material standard | EN 1.4404 | |||
Size range | M3-M80 #5 to 3 1/8" |
|||
Corrosion resistance | PREN 27** | |||
Hardening | Surface hardened | |||
Washer hardness* | ≥ 520HV0,05 | |||
Bolt grades | Up to A4-80 | |||
Temperature range*** | -160°C to 500°C | |||
Product designation | NLss NLspss |
|||
Laser marking type code | SS |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
Nord-Lock 254 SMO® Washers |
||||
Applications | Corrosive environment – chloride rich environments, offshore, pumps, heat exchangers, nuclear, food, medical, processing | |||
Material standard | EN 1.4547 | |||
Size range | M3-M39 #5 to 1 1/2" |
|||
Corrosion resistance | PREN 45** | |||
Hardening | Surface hardened | |||
Washer hardness* | ≥ 600HV0,05 | |||
Temperature range*** | -160°C to 500°C | |||
Product designation | NLss-254 NLspss-254 |
|||
Laser marking type code | 254 |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
Nord-Lock Alloy C-276 Washers |
||||
Applications | Acidic environment – chemical industry, evaporators, offshore, downhole tooling | |||
Material standard | EN 2.4819 or equivalent | |||
Size range | M4-M20 #8 to 1 1/2" |
|||
Corrosion resistance | PREN 68** | |||
Hardening | Surface hardened | |||
Washer hardness* | ≥ 520HV0,05 | |||
Temperature range*** | -160°C to 500°C | |||
Product designation | NLss-276 NLspss-276 |
|||
Laser marking type code | 276 |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
Nord-Lock Alloy 718 Washers |
||||
Applications | High temperatures – gas turbines, turbo charges, incinerators | |||
Material standard | EN 2.4668 or equivalent | |||
Size range | M4-M20 #5 to 1 1/2" |
|||
Corrosion resistance | PREN 29** | |||
Hardening | Surface hardened | |||
Washer hardness* | ≥ 620HV0,05 | |||
Temperature range*** | -160°C to 700°C | |||
Product designation | NLss-718 NLspss-718 |
|||
Laser marking type code | 718 |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
All types of Nord-Lock washers |
||||
Material type | ||||
Steel | Stainless steel (ss) |
254 SMO® | ALLOY C-276 |
ALLOY 718 |
Applications | ||||
General steel applications | General stainless steel applications | Corrosive environment – chloride rich environments, offshore, pumps, heat exchangers, nuclear, food, medical, processing | Acidic environment – chemical industry, evaporators, offshore, downhole tooling | High temperatures – gas turbines, turbo charges, incinerators |
Material standard | ||||
EN 1.7182 | EN 1.4404 | EN 1.4547 | EN 2.4819 or equivalent | EN 2.4668 or equivalent |
Size range | ||||
M3-M130 #5 to 5" |
M3-M80 #5 to 3 1/8" |
M3-M39 #5 to 1 1/2" |
M4-M20 #8 to 1 1/2" |
M4-M20 #5 to 1 1/2" |
Corrosion resistance | ||||
Minimum 1,000 hours in salt spray test (according to ISO 9227) | PREN 27** | PREN 45** | PREN 68** | PREN 29** |
Hardening | ||||
Through hardened | Surface hardened | Surface hardened | Surface hardened | Surface hardened |
Washer hardness* | ||||
≥ 465HV1 | ≥ 520HV0,05 | ≥ 600HV0,05 | ≥ 520HV0,05 | ≥ 620HV0,05 |
Coating | ||||
Delta Protekt® KL100 zinc flake coating | - | - | - | - |
Bolt grades | ||||
Up to 12.9 | Up to A4-80 | Up to A4-80 | Up to A4-80 | Up to A4-80 |
Temperature range*** | ||||
-50°C to 200°C | -160°C to 500°C | -160°C to 500°C | -160°C to 500°C | -160°C to 700°C |
Product designation | ||||
NL NLsp |
NLss NLspss |
NLss-254 NLspss-254 |
NLss-276 NLspss-276 |
NLss-718 NLspss-718 |
Laser marking type code | ||||
flZn | SS | 254 | 276 | 718 |
* In order to assure the unique mechanical locking function of the Nord-Lock washers, the hardness of the mating surfaces must be lower than the hardness of the Nord-Lock washers.
** PREN (Pitting Resistance Equivalent Number) = %Cr + 3,3x%Mo + 16x%N. Figures in table valid for base material.
*** Temperature recommendations based on information from the raw material supplier and from tests. Locking function not affected within the specification.
Výběr materiálu podložek
Parametr aplikace | ||||
Ocel | Nerezová ocel (ss) | 254 SMO® | ALLOY C-276 |
ALLOY 718 |
Typ oceli | ||||
Materiál podle EN 1.7182 | Materiál podle EN 1.4404 | Materiál podle EN 1.4547 | Materiál podle EN 2.4819 nebo ekvivalentní | Materiál podle EN 2.4668 nebo ekvivaletní |
Příklady aplikací | ||||
Všeobecné ocelové aplikace | Všeobecné nerezové aplikace. Bezchlorové / kyselé prostředí | Všeobecné aplikace pro užití se slanou vodou nebo ve slaném prostředí, čerpadla, aplikace pro atmosféry bohaté na chlorid, výměníky tepla, jaderné aplikace, odsolování, zařízení pro zpracování potravin a zdravotnická zařízení | Všeobecná kyselá prostředí, procesní a chemický průmysl, odpařovací přístroje, nástrojové vybavení mimopevninských aplikací | Aplikace operující ve vysokých teplotách, plynové turbíny, turbo dmychadla, spalovací pece |
Dostupné pro velikosti šroubů | ||||
M3-M130 #5 - 5" |
M3-M80 #5 - 3 1/8" |
M3-M39 #5 - 1 1/2" |
M3-M39 na poptávku #5 - 1 1/2" na poptávku |
M3-M39 na poptávku #5 - 1 1/2" na poptávku |
Typy podložek | ||||
Standardní vnější průměr (NL3 - NL130) Zvětšený vnější průměr (NL3,5sp - NL36sp) |
Standardní vnější průměr (NL3ss - NL80ss) Zvětšený vnější průměr (NL3,5spss - NL30spss) |
Standardní vnější průměr (NL3ss-254 - NL39ss-254) Zvětšený vnější průměr (NL3,5spss-254 - NL27spss-254) |
Standardní vnější průměr (NL3ss-276 - NL39ss-276) Zvětšený vnější průměr (NL3,5spss-276 - NL27spss-276) |
Standardní vnější průměr (NL3ss-718 - NL39ss-718) Zvětšený vnější průměr (NL3,5spss-718 - NL27spss-718) |
Povrchová úprava | ||||
Prokalené Delta Protekt® základní vrstva (KL100) a povrchová vrstva (VH302GZ) | Povrchově kalené | Povrchově kalené | Povrchově kalené | Povrchově kalené |
Tvrdost podložek* | ||||
≥ 465HV1 | ≥ 520HV0,05 | ≥ 600HV0,05 | ≥ 520HV0,05 | ≥ 620HV0,05 |
Odolnost vůči korozi | ||||
Zkouška v solné komoře (podle IS09227) – v solné mlze vydrží minimálně 1,000 hodin | PREN 27** | PREN 45** | PREN 68** | PREN 29** |
Pevnostní třídy šroubů | ||||
Až do 12.9 | Až do A4-80 | |||
Teplotní rozsah*** | ||||
-50°C až 200°C | -160°C až 500°C | -160°C až 500°C | -160°C až 500°C | -160°C až 700°C |
* Pro zajištění správné funkčnosti podložek Nord-Lock musí být tvrdost povrchu základního materiálu nižší než je tvrdost podložek Nord-Lock (viz. tabulka výše).
** PREN (Pitting Resistance Equivalent Number - index odolnosti proti bodové /pittingové/ korozi) = %Cr + 3,3x%Mo + 16x%N. Čísla v tabulce platná pro základní materiál.
*** Teplotní doporučení založena na informacích od dodavatele suroviny. Zajišťovací funkce není v rámci specifikace ovlivněna.
Tvrdost podložek
Pro zajištění jedinečné mechanické zajišťovací funkce podložek Nord-Lock, musí být tvrdost spojovaných povrchů nižší než tvrdost podložek Nord-Lock.
Typ podložky | Velikost | Povrchová úprava se zinkovými lamelami flZnnc – 600 | Bez povrchové úpravy |
Ocelové podložky (Through hardened) | NL3 - NL42 NL45 - NL130 |
≥ 465 HV1 ≥ 465 HV1 |
|
Nerezové podložky (Surface hardened) | NL3ss - NL80ss | ≥ 520 HV0.05 | |
Podložky SMO 254® | NL3ss-254 - NL80ss-254 | ≥ 600 HV0.05 |
Tabulka pro převod tvrdosti
Vickers HV |
Brinell HB |
Rockwell HRC |
Rockwell HRA |
Šroub 8.8 | Šroub 10.9 | Šroub 12.9 |
300 | 285 | 29,8 | 65,5 | | | ||
310 | 295 | 31,0 | 65,8 | | | ||
320 | 304 | 32,2 | 66,4 | | | 320 HV | |
330 | 314 | 33,3 | 67,0 | | | | | |
335 | 319 | 33,9 | 67,3 | 335 HV | | | |
340 | 325 | 34,4 | 67,6 | | | ||
350 | 333 | 35,5 | 68,1 | | | ||
360 | 342 | 36,6 | 68,7 | | | ||
370 | 352 | 37,7 | 69,2 | | | ||
380 | 361 | 38,8 | 69,8 | 380 HV | ||
385 | 366 | 39,3 | 70,1 | 385 HV | ||
390 | 371 | 39,8 | 70,3 | | | ||
400 | 380 | 40,8 | 70,8 | | | ||
410 | 390 | 41,8 | 71,4 | | | ||
420 | 399 | 42,7 | 71,8 | | | ||
430 | 409 | 43,6 | 72,3 | | | ||
435 | 414 | 44,1 | 72,5 | 435 HV | ||
440 | 418 | 44,5 | 72,8 | |||
460 | 437 | 46,1 | 73,6 | |||
480 | (456) | 47,7 | 74,5 | |||
500 | (475) | 49,1 | 75,3 | |||
520 | (494) | 50,5 | 76,1 | |||
540 | (513) | 51,7 | 76,7 |